Electricity Distribution

Electricity distribution is the final stage of electricity delivery, it transfers the electricity from the power transmission system to the individual consumer. The distribution posts are connected to the transmission system and the transmission voltage is reduced to an average voltage between 0.4 kV and 33 kV with They reduce the use of transformers and bring the voltage to the operating voltage. The power distribution lines are made in several categories.

In line with the production of Arta Sazeh Arshin company, all kinds of mesh and circular foundations are made in lengths of 9, 11 and 12 meters.


They are foundations with a metal structure that are usually made of IPE and IPN iron beams (in sizes 120, 140 and 200) and angles in lengths of 9, 11, 12 and 14 meters and are used as foundations for power distribution. They go to work.


Pipe bases that are usually made in lengths of 9, 11 and 15 meters in the form of hot press and flanges and sheets in standard thicknesses (Iraq Spec).


The power distribution lines are generally installed everywhere on the foundations. The forces that are applied to the body of a foundation are: vertical forces caused by the weight of the wire, the ice layer around the wire, fittings, insulation, console and The base itself and the horizontal force that is applied to it near the top of the base and is mostly caused by wire tension, wind pressure, and the forces caused by the weight of the conductors, and as a result, the non-uniformity of the distance between the bases and the deviation angle of the line. It should bear all these loads easily and confidently.